Identification_Information: Citation: Citation_Information: Originator: USDA-FSA-APFO Aerial Photography Field Office Publication_Date: 20141009 Title: July 2014 USDA NAIP Statewide Orthophotography Geospatial_Data_Presentation_Form: remote-sensing image Publication_Information: Publication_Place: Salt Lake City, Utah Publisher: USDA-FSA-APFO Aerial Photography Field Office Other_Citation_Details: Suggested bibliographic reference: RIGIS, 2015. July 2014 USDA NAIP Statewide Orthophotography. Rhode Island Geographic Information System (RIGIS) Data Distribution System, URL: http://www.rigis.org, Environmental Data Center, University of Rhode Island, Kingston, Rhode Island (last date accessed: 11 September 2015). Larger_Work_Citation: Citation_Information: Originator: Rhode Island Geographic Information System (RIGIS) Publication_Date: 1993 Title: Rhode Island Geographic Information System (RIGIS) Data Distribution System Online_Linkage: http://www.rigis.org Description: Abstract: Rhode Island statewide orthophotographs collected in July 12 & 18, 2014, by the National Agriculture Imagery Program (NAIP). 1-meter (~3.3-foot) spatial resolution, 4 band color (RGBIR). Purpose: NAIP imagery is available for distribution within 60 days of the end of a flying season and is intended to provide current information of agricultural conditions in support of USDA farm programs. For USDA Farm Service Agency, the 1 meter and 1/2 meter GSD product provides an ortho image base for Common Land Unit boundaries and other data sets. The 1 meter and 1/2 meter NAIP imagery is generally acquired in projects covering full states in cooperation with state government and other federal agencies that use the imagery for a variety of purposes including land use planning and natural resource assessment. The NAIP is also used for disaster response. While suitable for a variety of uses, prior to 2007 the 2 meter GSD NAIP imagery was primarily intended to assess "crop condition and compliance" to USDA farm program conditions. The 2 meter imagery was generally acquired only for agricultural areas within state projects. Supplemental_Information: The NAIP program is administered by the USDA Farm Service Agency (FSA) and has been established to support two main FSA strategic goals centered on agricultural production. These are, increase stewardship of America's natural resources while enhancing the environment, and to ensure commodities are procured and distributed effectively and efficiently to increase food security. The NAIP program supports these goals by acquiring and providing ortho imagery that has been collected during the agricultural growing season in the U.S. The NAIP ortho imagery is tailored to meet FSA requirements and is a fundamental tool used to support FSA farm and conservation programs. Ortho imagery provides an effective, intuitive means of communication about farm program administration between FSA and stakeholders. New technology and innovation is identified by fostering and maintaining a relationship with vendors and government partners, and by keeping pace with the broader geospatial community. As a result of these efforts the NAIP program provides three main products: DOQQ tiles, Compressed County Mosaics (CCM), and Seamline shape files The Contract specifications for NAIP imagery have changed over time reflecting agency requirements and improving technologies. These changes include image resolution, horizontal accuracy, coverage area, and number of bands. In general, flying seasons are established by FSA and are targeted for peak crop growing conditions. The NAIP acquisition cycle is based on a minimum 3 year refresh of base ortho imagery. The tiling format of the NAIP imagery is based on a 3.75' x 3.75' quarter quadrangle with a 300 pixel buffer on all four sides. NAIP quarter quads are formatted to the UTM coordinate system using the North American Datum of 1983. NAIP imagery may contain as much as 10% cloud cover per tile. Time_Period_of_Content: Time_Period_Information: Multiple_Dates/Times: Single_Date/Time: Calendar_Date: 20140712 Single_Date/Time: Calendar_Date: 20140718 Currentness_Reference: Ground Condition Status: Progress: Complete Maintenance_and_Update_Frequency: None planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -71.971729 East_Bounding_Coordinate: -71.050983 North_Bounding_Coordinate: 42.071301 South_Bounding_Coordinate: 41.109842 Keywords: Theme: Theme_Keyword_Thesaurus: ISO 19115 Topic Category Theme_Keyword: imageryBaseMapsEarthCover Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: farming Theme_Keyword: Digital Ortho rectified Image Theme_Keyword: Ortho Rectification Theme_Keyword: NAIP Theme_Keyword: Aerial Compliance Theme_Keyword: Compliance Place: Place_Keyword_Thesaurus: Geographic Names Information System Place_Keyword: RI Access_Constraints: None. Use_Constraints: This dataset is provided 'as is.’ The producer(s) of this dataset, contributors to this dataset, the Rhode Island Geographic Information System (RIGIS) consortium, the State of Rhode Island, and the University of Rhode Island do not make any warranties of any kind for this dataset, and are not liable for any loss or damage however and whenever caused by any use of this dataset. Please acknowledge both RIGIS and the primary producer(s) of this dataset in any derived products. Versions of the RIGIS logo suitable for both printed and web-based products are available at http://www.edc.uri.edu/rigis/logos. The USDA-FSA Aerial Photography Field office asks to be credited in derived products. Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: Aerial Photography Field Office (APFO) Contact_Address: Address_Type: mailing and physical address Address: 2222 West 2300 South City: Salt Lake City State_or_Province: Utah Postal_Code: 84119-2020 Country: USA Contact_Voice_Telephone: 801-844-2922 Contact_Facsimile_Telephone: 801-956-3653 Contact_Electronic_Mail_Address: apfo.sales@slc.usda.gov Native_Data_Set_Environment: Unknown Data_Quality_Information: Logical_Consistency_Report: None Completeness_Report: None Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: NAIP horizontal accuracy specifications have evolved over the life of the program. From 2003 to 2004 the specifications were as follows: 1-meter GSD imagery was to match within 3-meters, and 2-meter GSD to match within 10 meters of reference imagery. For 2005 the 1-meter GSD specification was changed to 5 meters matching the reference imagery. In 2006 a pilot project was performed using true ground specifications rather than reference imagery. All states used the same specifications as 2005 except Utah, which required a match of +/- 6 meters to true ground. In 2007 all specifications were the same as 2006 except Arizona used true ground specifications and all other states used reference imagery. In 2008 and subsequent years no 2-meter GSD imagery was acquired and all specifications were the same as 2007 except approximately half of the states acquired used true ground specifications and the other half used reference imagery. The 2008 states that used absolute ground control where; Indiana, Minnesota, New Hampshire, North Carolina, Texas, Vermont, and Virginia. From 2009 to present all NAIP imagery acquisitions used the +/- 6 meters to ground specification. Lineage: Source_Information: Source_Citation: Citation_Information: Originator: USDA-FSA-APFO Aerial Photography Field Office Publication_Date: 20141009 Title: CAROLINA, NE Geospatial_Data_Presentation_Form: remote-sensing image Type_of_Source_Media: UnKnown Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 20140718 Source_Currentness_Reference: Aerial Photography Date for aerial photo source. Source_Citation_Abbreviation: Georectifed Image Source_Contribution: Digital Georectifed Image. Process_Step: Process_Description: DOQQ Production Process Description USDA FSA APFO NAIP Program 2014 State: Rhode Island The imagery was collected using the following digital sensors: Leica ADS80-SH81 (Serial Number 1318) Leica ADS80-SH91 (Serial Number 1423) with Flight and Sensor Control Management System (FCMS) firmware 3.38. Cameras are calibrated radiometrically and geometrically by the manufacturer and are all certified by the USGS. Collection was performed using a combination of the following twin-engine aircraft: Pistons flying at 17,500 ft above mean terrain (tail number: C402 N246MP) and Turbines flying at 28,000 ft above mean terrain (tail number: C441 N441CJ) With these flying heights, there is a 23% sidelap, giving the collected data nominal ground sampling distance of 0.56 meters at 17,500 and 0.90 meters at 28,000. Based-upon the CCD Array configuration present in the ADS digital sensor, imagery for each flight line is 12,000-pixels in width. Red, Green, Blue, Near-Infrared and Panchromatic image bands were collected. The ADS 80 has the following band specifications: Pan 465-676 Red 604-664 Green 533-587 Blue 420-492 Near Infrared 833-920 all values are in nanometers The ADS40 has the following band specifications: Pan 465-680 Red 610-660 Green 535-585 Blue 430-490 Near Infrared 835-885 all values are in nanometers Collected data was downloaded to portable hard drives and shipped to the processing facility daily. Raw flight data was extracted from external data drives using GPro software. Airborne GPS / IMU data was post-processed using INYS, PosPac and/or TerraPos software and reviewed to ensure sufficient accuracy for project requirements. Using Pictovera software, planar rectified images were generated from the collected data for use in image quality review. The planar rectified images were generated at five meter resolution using a two standard deviation histogram stretch. Factors considered during this review included but were not limited to the presence of smoke and/or cloud cover, contrails, light conditions, sun glint and any sensor or hardware-related issues that potentially could result in faulty data. When necessary, image strips identified as not meeting image quality specifications were re-flown to obtain suitable imagery. Aero triangulation blocks were defined primarily by order of acquisition and consisted of four to seventeen strips. Image tie points providing the observations for the least squares bundle adjustment were selected from the images using an auto correlation algorithm. Photogrammetric control points consisted of photo identifiable control points, collected using GPS field survey techniques. The control points were loaded in to a softcopy workstation and measured in the acquired image strips. A least squares bundle adjustment of image pass points, control points and the ABGPS was performed to develop an aero triangulation solution for each block using Pictovera software. Upon final bundle adjustment, the triangulated strips were ortho-rectified to the digital elevation model (DEM) The most recent USGS 10 meter DEMs were used in the rectification process. Positional accuracy was reviewed in the rectified imagery by visually verifying the horizontal positioning of the known photo-identifiable survey locations using ArcGIS software. The red, green, blue, and infrared bands were combined to generate a final ortho-rectified image strip. The ADS sensor collects twelve bit image data which requires radiometric adjustment for output in standard eight bit image channels. The ortho-rectified image strips were produced with the full 12 bit data range, allowing radiometric adjustment to 8 bit range to be performed on a strip by strip basis during the final mosaicking steps. The 12 bit data range was adjusted for display in standard eight bit image channels by defining a piecewise histogram stretch using OrthoVista Radiometrix software. A constant stretch was defined for each image collection period, and then strip by strip adjustments were made as needed to account for changes in sun angle and azimuth during the collection period. Strip adjustments were also made to match the strips histograms as closely as possible to APFO specified histogram metrics and color balance requirements. Automated balancing algorithms were applied to account for bi- directional reflectance as a final step before the conversion to 8 bit data range. The imagery was mosaicked using manual seam line generation in Intergraph GeoMedia OrthoPro. Process_Date: 20141009 Process_Step: Process_Description: Data contributed to RIGIS by the USDA Natural Resources Conservation Service Rhode Island State Office. Using Global Mapper v16, data were projected to Rhode Island State Plane NAD83 feet, then exported to both GeoTIFF and JPEG2000 (target compression ratio 1:10) file formats using a 10,000ftx10,000ft tiling system. Tile names are based upon the coordinates of the southwest corner of the given tile. Individual tiles overlap their neighbors by approximately 1 pixel, and none of the original image data were clipped away. Original metadata were written by the USDA FSA; minor updates to content were made to create this project-wide metadata record for distribution via RIGIS. Process_Date: 20150326 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: University of Rhode Island Environmental Data Center Contact_Person: Greg Bonynge Contact_Position: Geospatial Extension Specialist Contact_Address: Address_Type: mailing and physical Address: 1 Greenhouse Road City: Kingston State_or_Province: RI Postal_Code: 02881 Contact_Voice_Telephone: 401-874-2180 Contact_Electronic_Mail_Address: greg@edc.uri.edu Contact_Instructions: Email preferred. Spatial_Data_Organization_Information: Indirect_Spatial_Reference: State of Rhode Island Direct_Spatial_Reference_Method: Raster Raster_Object_Information: Raster_Object_Type: Pixel Row_Count: 106680 Column_Count: 76200 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Planar: Map_Projection: Map_Projection_Name: NAD 1983 StatePlane Rhode Island FIPS 3800 Feet Transverse_Mercator: Scale_Factor_at_Central_Meridian: 0.99999375 Longitude_of_Central_Meridian: -71.5 Latitude_of_Projection_Origin: 41.08333333333334 False_Easting: 328083.3333333333 False_Northing: 0.0 Planar_Coordinate_Information: Planar_Coordinate_Encoding_Method: coordinate pair Coordinate_Representation: Abscissa_Resolution: 0.000000007286382608384659 Ordinate_Resolution: 0.000000007286382608384659 Planar_Distance_Units: foot_us Geodetic_Model: Horizontal_Datum_Name: D North American 1983 Ellipsoid_Name: GRS 1980 Semi-major_Axis: 6378137.0 Denominator_of_Flattening_Ratio: 298.257222101 Entity_and_Attribute_Information: Overview_Description: Entity_and_Attribute_Overview: 32-bit pixels, 4 band color(RGBIR) values 0 - 255 Entity_and_Attribute_Detail_Citation: None Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: University of Rhode Island Environmental Data Center Contact_Person: Erica Tefft Contact_Address: Address_Type: mailing and physical Address: 1 Greenhouse Road City: Kingston State_or_Province: RI Postal_Code: 02881 Contact_Voice_Telephone: 401-874-5054 Contact_Electronic_Mail_Address: erica@edc.uri.edu Contact_Instructions: email preferred Distribution_Liability: This dataset is provided 'as is.' The producer(s) of this dataset, contributors to this dataset, the Rhode Island Geographic Information System (RIGIS) consortium, the State of Rhode Island, and the University of Rhode Island do not make any warranties of any kind for this dataset, and are not liable for any loss or damage however and whenever caused by any use of this dataset. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: GeoTIFF and JPEG2000 File_Decompression_Technique: ZIP Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: http://www.edc.uri.edu/rigis Fees: No fee for downloading directly from the RIGIS Data Distribution System located at http://www.edc.uri.edu/rigis. Metadata_Reference_Information: Metadata_Date: 20141009 Metadata_Review_Date: 20150911 Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: USDA-FSA-APFO Aerial Photography Field Office Contact_Address: Address_Type: mailing and physical address Address: 2222 West 2300 South City: Salt Lake City State_or_Province: Utah Postal_Code: 84119-2020 Country: USA Contact_Voice_Telephone: 801-844-2922 Metadata_Standard_Name: Content Standard for Digital Geospatial Metadata Metadata_Standard_Version: FGDC-STD-001-1998